| CLICK ON >>>  <<< CLICK ON WADSWORTH SALES IS PROUD TO ANNOUNCE WE ARE NOW A "SCANNER MASTER" AFFILIATE WE ARE OFTEN ASKED WHAT IS THE BEST OVERALL SCANNER ON THE MARKET TODAY THAT WILL RECEIVE ADVANCED "P25" TRUNKING THAT THE POLICE ARE NOW USING ? UPDATE JULY 2009 NEW UNIDEN "BCD 996 XT" The new Uniden BCD996XT may look the same as its similarly named predecessor, the 996T, but inside it's a whole lot different! The new scanner significantly raises the bar with much improved APCO-25 digital decoding as well as a host of new features and more memory. For those who like GPS scanning, a feature no other manufacturer offers, you can now enable and disable not only Systems, but Groups as well, depending on your location (the optional GPS antenna that we sell is required). The radio now offers a band-scope feature, a Fire Tone Out search feature to help you determine the tone out frequencies being used, improved Close Call, APCO-25 NAC code decoding, and more. The 996XT is a big leap forward. Get your 996XT today with the optional Hometown Programming, ready to use right out of the box! Features (New Features over the older model 996T shown in bold) Frequency Coverage - 25.0000 - 512.0000 MHz
- 758.0000 - 823.9875 MHz
- 849.0125 - 868.9875 MHz
- 894.0125 - 960.0000 MHz
- 1240.0000 - 1300.0000 MHz
Limits Special Functions Band Scope Function - Frequency Span 0.2 MHz To 500 MHz
- Frequency Step 5 kHz To 100 kHz
Two-Tone-Sequential - 250.0-3500.0Hz , 0.1Hz Step Programmable
WX Alert - 1050 Hz Tone System
- NWR-SAME System (Warning / Watch / Advisory)
Supported trunking systems - Motorola Systems: Type I, II, II/I (hybrid)
- EDACS Systems: FM, NFM, and SCAT
- LTR Systems
- APCO Systems: Astro Imbe, Astro 25
Dynamic memory allocation capacity - Systems: 500 max
- Groups: 20 per system
- Site: 1000 max (All) 256 per system
- Channels: 25000 max (40128 memory blocks)
- Channels per Trunked System: 500 max
Heterodyne System - 1st IF: 380.7 to 380.8 MHz / 265.5 to 265.6 MHz
- 2nd IF: 10.8 MHz
- 3rd IF: 450 kHz
WANT TO SEE THE OWNERS MANUAL? WANT TO SEE THE BIG REVIEW ARTICLE ? Canada Customers Only (other than government officials): A radio license must be obtained prior to possession and use of a digital scanner. Please check with government authorities for further information on this Canadian regulation. CLICK ON IT SLIDE ACROSS BASE/MOBILE OR PORTABLE AND THEN SCROOL DOWN TO THE "BCD 996XT" SCANNER CLICK ON >>> <<< CLICK ON
NEW >> Uniden Bearcat BC-RH96 Remote Head Our Price: $169.95 The Uniden BC-RH96 Remote Head lets you fully control your BCD996XT and the older BCD996T, the BCT15X and the older BCT15 base/mobile scanners as well as the BCD396XT, the older BCD396T, the BC346XT and the BR330T portable scanners. You can effectively turn your handheld scanner into a mobile controlled by this head. For mobile users of a 996 or a 15 who don't have a good place to mount the bulky full-size radio, now you can mount it in your trunk or under your seat and fully control it from this control head. This is not a kit where you detach the existing head unit of the radio. This is a brand-new control unit that connects to your scanner via the serial port via a cable. The package includes the control head, a 10-foot connector cable, DC power cord, mounting bracket, strain relief, quick reference cards, and owner's manual. At only 1 3/4 inches deep you can find some great mounting options above, on or under your dash or in the center console. You could even have multiple control heads at home or mobile. Please mount and use your mobile head units carefully and responsibly and take care to consider their effect in an accident condition. Features and Information Backlit Keypad and Display Compact Size Includes 10 foot data cord and power cable Controls all functions - including volume and squelch (see manual for power-on limitations)* Full Remote Control for the BCD996T, BCD996XT, BCT15, BCT15X, BCD396T, BCD396XT, BC346XT and the BR330T TO ORDER THE REMOTE HEAD CLICK ON >>> <<< CLICK ON GO TO THE ACCESSORIES TAB ON THE LEFT CLICK ON THEN GO TO THE "REMOTE HEAD" TAB AND CLICK ON WANT TO SEE THE OWNERS MANUAL?
WHY SHOULD I BUY FROM SCANNER MASTER ? Scanner Master Corporation - Old HQ
Shop the Scanner Experts! 
NEW HEADQUARTERSScanner Master Police Scanners Corporation
260 Hopping Brook Road Holliston, MA 01746 Scanner Master was formed in 1978 and since that time has been producing the nation's most comprehensive communications guidebooks including Scanner Master regional volumes and Monitor America. Richard Barnett of Scanner Master also edited Police Call, the 7-volume regional frequency guide series that went out of production in 2005. For the past 15 years, Scanner Master has been a consultant to the scanner-radio industry. We participated in the design and development of the industry's first trunktracking scanner, the Bearcat 235, as well as many later models. As the industry's leading scanner consultant, no dealer or distributor is more knowledgeable about scanner functionality and operation. No dealer is more qualified to assist you with the programming of your scanner, a service which we now offer for a fee.
Scanner Master is also the North American distributor for Butel's ARC (Advanced Radio Control) scanner software, the finest and most popular scanner software sold worldwide today. Scanner Master is also the North American distributor for a line of Czech-built scanner accessories including filters and pre-amplifiers. Scanner Master can also work with you to develop customized monitoring systems. Applications include dispatch centers, news gathering organizations and remote monitoring stations. We have recently worked with the Miami Herald and Metro Traffic Control on such custom installation and programming. Scanner Master and its affiliated companies are currently developing sophisticated monitoring solutions and accessories, both software and hardware-based. Check our News, our New Product's section as well as our New Product Guide for details and product updates.
We also urge you to subscribe to our e-mail newsletter which will notify you automatically of important new product news. Read what some of our customers have to say about us on our Customer Comments page. Customer service and satisfaction is one of our main priorities, Meet Our Staff and see some of the people that work at Scanner Master.
ARC996 Pro Software CD $69.95 - ARC996 includes the most versatile memory editor available on the market, our new developed 'intelligent system browser' technology makes navigation as easy as possible and you can customize the browser.
- With ARC996 and the Radioreference.com Webservice you can access the Radioreference database and download conventional frequencies and trunk id and system data from more than 8000 systems!
- QuickKey Overview: 'Drag and Drop' your systems or groups in QuickKeys.
- Store latitude, longitude and FCC callsign per system
- Lookup Latitude & Longitude based on US address or zipcode
- Built in converter DMS <> DEG format!
- ARC996 PDF User Manual
- Copy/paste groups between systems, building new systems was never this easy!
- Instant firmware updates notification! Warns you when Uniden releases new firmware for you scanner.
- Read data directly from the RadioReference Database, 'browse' for local trunk systems and let ARC996 do the programming!
- 'intelli upload': Replaces systems that are stored in your scanner without having to reset your scanner first! ARC996 will never reset your scanner!
- ARC996 can program up to 250 channels per group or 5000 channels per conventional system.
- ARC996PRO also includes full PC Virtual Control with 'no loss' recording and data logging.
- FCC lookup utility.
- Don't have a serial port? ARC996 also works with the Uniden USB-1 cable.
- Windows XP/2000/Vista, minimum 800x600 video, 512 RAM, free serial or USB port (USB requires Uniden USB-1 cable).
| Option | ARC996BASIC($39.95) | ARC996PRO($69.95) |
|---|
Enhanced Editor for conv./trunk channels
| Yes | Yes | Multi Trunk site programming
| Yes | Yes | 'Basic' Virtual Control
| Yes | Yes | RadioRef Import
| Yes | Yes | WebCatcher
| Yes | Yes | Automatic BC996T Firmware check
| Yes | Yes | Data logging/history
| No | Yes | 'no loss' Harddisk Audio Recording
| No | Yes | Closecall/Subtone logging
| No | Yes |
Check out the clear 'tree' structure: 
Find latitude and longitude based on US street address or zipcode: 
TO PURCHASE THE ABOVE SOFTWARE CLICK ON >>> <<< CLICK ON AND GO TO THE SEARCH BOX AND TYPE IN "ARC 996"
HPN-30118 Combined Notch Filter
$49.95 Description useable frequency range: 31 - 80 and 118 - 1600 MHz
insertion loss: 1 dB typ
suppression in the range: 0 - 20 MHz: 30 dB min
suppression in the range: 87 - 109 MHz: 30 dB min
no intermodulation - passive filter
input connector: BNC/f
output connector: BNC/m
input/output impedance: 50 Ohms
size: 18,5 x 34 x 70 mm
weight: 35 g
This filter is primarily designed for use between the antenna and a receiver/scanner, although it can find its use in many other applications. It combines a passive high pass filter that greatly attenuates all signals below 30 MHz and a passive notch filter that suppresses the strong signals from the VHF FM broadcast band by at least 30dB. It passes all signals from 31 to 80 MHz and from 118 to 1600 MHz with a negligeable insertion loss below 1dB. Hence it is an ideal accessory for all hand held and table top scanners (Yupiteru, Alinco, AOR, ICOM, YAESU, Uniden-Bearcat etc.). Its BNC coax connectors simply fit onto the antenna input connector and the antenna is connected to the BNC connector of the filter. The filter finds its use at places with strong broadcast signals from LW, MW and SW bands and especially from VHF FM band. These signals very often cause overloading of the receiver front end and hence significant deterioration of sensitivity. With the filter it is then not necessary to use the attenuator of the receiver to get rid of the interference and overloading, so the receiver sensitivity is maintained. The filter eliminates all the interference from all the bands below 30 MHz, including CB. This filter also improves reception in the air-band which is close to the VHF FM band. The filter has been tested at places close to 100kW broadcast transmitters when even top class scanners like ICOM IC-R8500 or AOR AR-5000 suffer from overloading in the air-band. The filter enables clear reception at such difficult locations. It may reduce image reception of signals from VHF FM band. It can also be used between a wide band antenna, such as discone, vertical or log-periodic, and a pre-amplifier, which will reduce the overloading of the wide band preamp. TO PURCHASE THE NOTCH FILTER CLICK ON >>> <<< CLICK ON AND GO TO THE SEARCH BOX AND TYPE IN "HPN-30118"
 DD1300 Double Discone Base Antenna $149.95 Description A high gain discone type wideband receiving antenna, with a low SWR across the VHF/UHF Bands. The antenna has approx. 2.8db gain over a conventional single discone, and provides excellent matching into 50 ohms for transmit or receive. Manufactured in England from high quality components designed to last in all types of environments.
FEATURES
Frequency (RX) : 25-1300Mhz
Transmit VHF 130-175 Mhz, UHF 410-475Mhz
Antenna Type 16 element double disconev Connector N Type
TX Power Max 200watts
Size : Max. Element length 740mm
Weight 2kg TO PURCHASE THE ABOVE ANTENNA CLICK ON >>> <<< CLICK ON AND GO TO THE SEARCH BOX AND TYPE IN "DD1300"
AR-Mini Receiver - Consumer Version $299.95 
Water resistant hand-held communication receiver.
Product Specifications
• 100kHz - 1299.995MHz, AM, WFM, NFM
• Bandwidths: FM-N/AM 15 kHz, FM-Wide 220 kHz (-6 dB)
• TCXO for greater stability (+/-2.5ppm) • 1000 Alpha memories in 10 banks
• Long Battery Life (Approx. 22 hours)
• 1000 memory channels
• CTCSS & DCS
• Priority Channel
• 2 VFOs
• Management PC software • Size: 2.4 x 3.7 x 0.9 inches • Weight: 7.4 oz In the box: • AC Adapter • Two AA NiMH Batteries • SMA Antenna • Belt Clip • Hand Strap WANT TO SEE THE OWNERS MANUAL? TO PURCHASE THE AR Mini CLICK ON >>> <<< CLICK ON AND GO TO THE SEARCH BOX AND TYPE IN "AR MINI"
SCANNER MASTER HOME PAGE LINK <<< CLICK ON TO BUY ABOVE ITEMS USE THE TABS ON THE LEFT SIDE TO NAVIGATE TO THE SPECIFIC PRODUCTS CLICK ON >>> <<< CLICK ON
WANT TO MAKE $$$ BECOME A SCANNER MASTER AFFILIATE AND POST THEIR LOGO AND BANNER ON YOUR OWN WEBSITE Affiliate Program
Make a ton of cash by telling people about us…
Our unique affiliate program allows you to generate a solid income, with little work by you. We have developed the tools you need to be successful. Affiliates have access to an additional section of web pages in your My Account manager. You will receive your own unique URL which will automatically track all sales you generate.
The My Account manager pages also allow you to automatically generate banner ads that you can just choose, copy & paste, as well as view your current statistics and earnings. You can track total click-throughs generated, as well as how many of those clicks actually convert to sales.
The Scanner Master logos are available for you to use as a link into our web site from yours which will generate affiliate business for you. We recommend that you also promote certain scanners, scanner package deals, accessories, software, antennas, and more via links to our site to drive the business and generate revenue for you. You can either use product images from our site, or just use text links. How to link to certain products and categories in addition to the home page is detailed in your Affiliate section under "Generate Banner Ads" at the bottom of the page.
RadioRefererence.com is one of the world’s foremost online resources for all your radio communication needs. Also a Scanner Master affiliate, his home page is a great example of how to display our banner and maximize your click throughs.
To start the enrollment process, you must submit a completed online application found on our home page. We then review the application and determine, in our sole discretion, whether to accept or reject you as an affiliate. Web sites may be rejected because they contain obscene, inappropriate or otherwise objectionable material. We will notify you regarding your application in a timely manner (typically 1-3 business days).
Applications not completely filled out with contact name, company name, address, phone number, web site address, etc., will NOT be accepted. Applications will not be accepted for web sites that are not live, or web sites currently under construction.
If approved into the Affiliate Program, your web site will be reviewed periodically. If a link, graphic or logo for scannermaster.com is not properly displayed and/or properly functioning, you will be notified immediately. You will be given ten (10) days to remedy the issue and if the necessary changes are not made within ten 10 days, the affiliate agreement will be terminated. We reserve the right to terminate the program with any affiliate at any time at our discretion.
Payout percentage rates on the total sales generated by the affiliate are setup in levels. The payout may reach 5 levels deep, based on one affiliate referring another affiliate. For example, if a customer goes to your site and clicks on the link to Scannermaster.com and then sign up as a affiliate on our site, they will now be your second level affiliate.
Each new affiliate is always at level 1. So, if level 1 payout percentage is set to 0.03, the affiliate will earn 3% of all sales he/she generates. If he/she refers another affiliate, that affiliate will become level 2, and the original affiliate will earn a percentage of sales generated by this new affiliate. If this new affiliate happens to refer another affiliate, the original affiliate AGAIN may collect a percentage of this new affiliates generated sales. This may continue up to 5 levels deep. Keep in mind that each new affiliate starts at his/her own level 1, whereas he/she can refer 5 levels deep as well.
Current Percent Levels are as follows.
Percent Level 1 = 3%
Percent Level 2 = 2%
Percent Level 3 = 2%
Percent Level 4 = 1%
Percent Level 5 = 1%
The minimum total earnings required before we generate and mail a check is $50.00. Commissions are calculated and checks cut once per quarter. International customers, you must have a working PayPal account to receive commission payments. We do not send them in any other form. Only International customers will be paid through PayPal, all others will receive a check.
Affiliates are tracked for 10 years! For example, 3650 days to track, means that if a customer visits our website through your affiliate link, that customer's computer is tagged with your affiliate ID for 3650 days. So, if the customer visits our website for the next 10 years and places an order, you will continue to get commission from the sale. Many sites only allow for 7-10 days to track. We are basically saying, you referred that customer so you should continue to get credit for the life of the customer. The only instance this would stop working is if your customer cleared his cookies, then his computer would no longer be tagged with your ID and you would not receive any additional commission.
Percent levels and days to track are setup and the sole discretion of Scanner Master Corp. and may be changed without notice.
Be on your way to success today, sign up now! SCROLL TO THE BOTTOM OF THE PAGE AND CLICK ON THE "BECOME AN AFFILIATE" TAB
Typographical Errors
In the event that a Scanner Master Corp. product is mistakenly listed at an incorrect price, Scanner Master Corp. & Wadsworth Sales reserves the right to refuse or cancel any orders placed for product listed at the incorrect price.
Scanner Master Corp. & Wadsworth Sales reserves the right to refuse or cancel any such orders whether or not the order has been confirmed and your credit card charged. If your credit card has already been charged for the purchase and your order is cancelled, Scanner Master Corp. shall issue a credit to your credit card account in the amount of the incorrect price.
CLICK ON >>> <<< CLICK ON FROM
| |